Domino Ax Series User Manual

OPERATION
4-56 EPT019297 Issue 1 November 2016
EDITOR DEFAULTS
Set the default label settings. New labels will use these defaults.
Print Offset
Home > Setup> Editor Defaults > Properties
The Forward offset is used to adjust the position of the label on the print surface. If the print head
is on a traversing line the Reverse offset can also be set.
Note: This is a global print setting, label designs can also be saved with their own individual
print offset, see page 4-22.
Print Offset Diagram
Print Delay Print Delay
Reverse
Offset
Forward
Offset
Direction of printDirection of print
Print
Trigger
Print
Trigger

Domino Ax Series Specifications

General

Brand	Domino
Model	Ax Series
Category	Printer
Language	English