INSTALLATION
EPT019297 Issue 1 November 2016 3-21
ITM Installation
WARNING: Protective equipment such as gloves and glasses must be worn when
this procedure is carried out. Physical contact with ink or make-up
can cause skin or eye damage.
Notes: (1) Paper towels (or similar) and wash are required for this procedure.
(2) Waste paper towels will be contaminated with chemicals which are hazardous to the
environment. Local waste disposal regulations must be followed to safely dispose of
used paper towels.
This procedure should be followed when installing the ITM for the first time, or following long shut
down after ITM removal. If replacing an old ITM, the procedure described on page 5-10 must be
followed.
To install the ITM:
(1) Unpack the ITM.
(2) Open the printer ink cabinet.
(3) Remove the manifold sealing strip that protects the ink block manifold.
Ink Block Manifold
Ink Block
Manifold
To Next Page
Loading...
Need help?
General
