OPERATION
EPT019297 Issue 1 November 2016 4-71
557 Misaligned jet at start-up The nozzle is blocked.
Run the nozzle unblocking wizard, see page 5-18.
The ink jet is misaligned.
Check the ink jet alignment, see page 5-19.
The gutter is blocked.
Clean the print head, page 5-17.
1312 Charge Detection Error The printer cannot detect ink drops within the
charge electrode due to a build of ink of the charge
electrode.
Clean the print head, page 5-17.
The ink jet is not modulating correctly.
Check the ink jet modulation and break-up within
the charge electrode. If this is not visible contact
the local support office.
The ink jet is misaligned.
Check the ink jet alignment, see page 5-19.
1313 Recovered Successfully The printer has recovered from a previous fault or
alert, no user action should be required.
If this alert repeats and the print quality is reduced,
contact the local support office.
Alert ID Description Possible Cause and Remedy
To Next Page
Loading...
Need help?
General
