INSTALLATION
20509 Issue 7 Jan 2018 A-13
Proximity
This detector is fitted on the side of the product line and set up so that a
light beam from the detector is reflected back by the product itself. The
detector senses the reflected beam and the printing process starts when
reflection either begins or ends. The reflection may be from the body of the
product or from a light coloured marking on a darker background on the
product. This sensor can therefore be used where gaps do not necessarily
exist between product items.
Pin 5 =
+12V
Pin 3 =
Print Go
Pin 1 = 0V
Product Detect
Inputs 1 & 2
Proximity Detector
TP7161_1
To Next Page
Loading...
Need help?
General
