INSTALLATION
A-4 20509 Issue 7 Jan 2018
PRINTER INSTALLATION
Details of the printer equipment for use in installation are given in the
diagram on the next page.
Positioning the Control Cabinet
The control cabinet must be:
• Level
•Free from vibration
• Electrically isolated from other equipment.
Controls on the rear panel must be easily accessible. Maintenance access
is from above. There should be sufficient space to allow removal of the top
cover and enough room to reach all parts of the cabinet.
The ink container should be conveniently placed for regular replacement.
The feed pipe to the ink container is 2 metres long.
A stand to support the system is available from Domino part number 33210.
The printer should not be put into an area where the temperatures go
outside the range +5
o
C to +40
o
C, or the relative humidity goes outside the
range 10%to 90% (non-condensing).
To Next Page
Loading...
Need help?
General
