2019.07.11
© 2017 Eaton. All rights reserved
98
TRSM0940 Service Procedures | MHP/MXP/VHP/VXP Splitter Cylinder Disassembly and Assembly
Splitter Cylinder Removal
1. Ensure transmission is drained of oil.
2. Remove retaining
cap screws from the Splitter Cylinder
Cover
3. Remove
cover and gasket
4. Remo
ve 3/4” nut on the Splitter Yoke Bar.
5. Remove the Splitter
Cylinder Housing from the rear of
the Auxiliary Case Housing