EFI Fiery X3eTY2 User Manual

CONNECTING TO THE NETWORK
10
Stages of installation on the network
Installation can be performed by a network or printing administrator. The stages of a
successful installation are:
1 Configuring the network environment
Configure network servers to provide users with access to the Fiery X3eTY2 as a networked
printer. For information about configuring network servers in Windows and UNIX network
environments as they relate specifically to the Fiery X3eTY2, see page 12. For information
about using your network, see the documentation that accompanies your network system.
2Physically connecting the Fiery X3eTY2 to a functioning network
Prepare a network node for the Fiery X3eTY2. Obtain cable, route it to the location where the
Fiery X3eTY2 is to be installed (near the copier), and attach the cable to the network
connector of the Fiery X3eTY2. For details, see page 20.
3 Setting up the Fiery X3eTY2
Configure the Fiery X3eTY2 for your printing and network environment (see Setting up the
Fiery X3eTY2 from the Copier Touch Panel).
4Preparing user computers for printing
Install the files needed for printing, install user software, and connect the user computers to
the network. The software installation is described in Printing from Windows and Printing
from Mac OS.
5Administering the Fiery X3eTY2
Monitor and maintain system performance and troubleshoot problems that may arise
(see Administering the Fiery X3eTY2).

EFI Fiery X3eTY2 Specifications

General

Brand	EFI
Model	Fiery X3eTY2
Category	Printer
Language	English