PREPARING FOR FIERY X3ETY2 SETUP
15
PREPARING FOR FIERY X3ETY2 SETUP
To prepare for printing at your site, you must do some initial Fiery X3eTY2 configuration
(or “Setup”) to specify the network environment and the types of printing you do. Before you
perform Setup, decide the levels of access to implement, such as passwords and other security
features that the Fiery X3eTY2 offers. Because many of these security features are
interconnected, review the information in this chapter to plan for an effective security system,
and then perform Setup accordingly.
Levels of access and control
When you configure the Fiery X3eTY2 during Setup, you (as system administrator)
implement a particular level of control by configuring these elements:
•Users and Groups
•Print connections
•Access to WebTools
Users and Groups
With the Configure WebTool, you create users, assign passwords to users, create groups with
particular privileges, and assign users to the groups. Several groups are provided by default,
and you can create new groups. All users in a group have the same privileges.
Passwords
When you create new users, you assign passwords to them. In addition, you can also set
passwords for these areas:
•Default admin user in Administrators group
•Default operator user in Operators group
By default, the default Administrator password is set on the Fiery X3eTY2. Change the
Administrator password periodically to protect the Fiery X3eTY2 from random or accidental
changes to Setup. For more information, see “Setting passwords” on page 37.
Users in the Administrators and Operators groups have privileges in addition to the explicit
ones that you set when you create groups. Examples of these privileges are provided below.
To Next Page
Loading...
Need help?
General
