ADMINISTERING THE FIERY X3ETY2
38
Updating system software
The Fiery X3eTY2 uses unique system software to receive and process jobs and send job data
to the copier. Resident on the Fiery X3eTY2, system software processes and controls the
spooling, rasterizing, and printing of jobs, as well as job accounting (the Job Log), storage,
and retrieval.
You can check for system software updates from a secure site on the Internet. Updates to user
software may also be available.
To check for software updates or to configure the Fiery X3eTY2 to receive updates
automatically, see Configure Help.
Clearing the Fiery X3eTY2
The Clear Server command allows you to clear all queued print jobs from the Fiery X3eTY2
Print, Hold, and Printed queues. Jobs can also be deleted, either individually or as a group,
using Command WorkStation. Clear Server also clears all jobs archived on the Fiery X3eTY2
hard disk, the index of archived jobs, and all FreeForm masters.
TO CLEAR THE FIERY X3ETY2
• In Command WorkStation, choose Clear Server from the Server menu.
For more information, see Command WorkStation Help.
Back up your original data on your own media at the same time you store and save data on the
Fiery X3eTY2 hard disk. Never damage or reset the Fiery X3eTY2 hard disk, and do not turn
off the system while accessing the hard disk. For instructions on how to turn on and turn off
the Fiery X3eTY2, see page 45.
If the Fiery X3eTY2 hard disk or system software experiences technical difficulties, data stored
and saved on the Fiery X3eTY2 hard disk may be irretrievably lost. If problems with the hard
disk occur, extended storage of the following data cannot be assured:
• Third-party fonts
•Print jobs
• Color profiles, including profiles downloaded or edited with Spot-On
•Job notes and instructions
• Scanned image data
•Jobs edited with Impose
•Variable data documents
• E-mail Service Address Book
•Fiery X3eTY2 configuration information (list of all the settings in effect for the current
Setup)
To Next Page
Loading...
Need help?
General
