SETTING UP THE FIERY X3ETY2 FROM THE COPIER TOUCH PANEL
26
TO PRINT THE CONTROL PANEL MAP
1At the copier touch panel, press the Controller button.
2 Select Print Pages.
3 Select Control Panel Map.
Types of Setup screens
Two types of Setup options are available:
After you enter the settings, you are prompted to save the changes. If you save the changes,
your settings overwrite previous settings. If you cancel the changes, your previous settings are
retained. If necessary, the Fiery X3eTY2 restarts after you exit the Setup menu.
Multiple choice
questions
You are given choices that appear as buttons on the touch
panel (for example, Yes or No, or a list of settings from which
to choose). The currently selected value is highlighted. Press
the button for the desired option on the copier touch panel.
As you proceed through the remaining options, make your
selections, and press the appropriate button to save the
changes when you are prompted.
Information
entry options
You must specify the information for your site (the printer
name or IP address, for example). Use the touch panel
window keyboard to enter information.
To Next Page
Loading...
Need help?
General
