Using the Printer Software with Windows 100
EPSON AcuLaser C3800 User's Guide
Setting up clients
This section describes how to install the printer driver by accessing the shared printer on a
network.
Note:
❏ To share the printer on a Windows network, you need to set the print server. For details, see
"Setting up your printer as a shared printer" on page 96 (Windows Me or 98) or "Using an
additional driver" on page 97 (Windows XP, XP x64, 2000, Server 2003, or Server 2003 x64).
❏ This section describes how to access the shared printer on a standard network system using
the server (Microsoft workgroup). If you cannot access the shared printer due to the network
system, ask the administrator of the network for assistance.
❏ This section describes how to install the printer driver by accessing the shared printer from the
Printers folder. You can also access the shared printer from Network Neighborhood or My
Network on the Windows desktop.
❏ You cannot use the additional driver on the server system OS.
❏ When you want to use EPSON Status Monitor at a client, you have to install EPSON Status
Monitor from the CD-ROM with administrator privileges in each client.
With Windows Me or 98
Follow the steps below to set Windows Me or 98 clients.
1. Click Start, point to Settings, then click Printers.
2. Double-click the Add Printer icon, then click Next.
3. Select Network printer, then click Next.
4. Click Browse, and the Browse for Printer dialog box appears.
Note:
You can also type “\\(the name of the computer that is locally connected to the shared
printer)\(the shared printer’s name)” in the network path or queue name.
To Next Page
Loading...
Need help?
General