Replacing Consumable Products 233
EPSON AcuLaser C3800 User's Guide
Fuser Unit
Handling precautions
Always observe the following handling precautions when replacing the consumable
products.
Do not touch the surface of the consumable product. Doing so may impair print quality.
w
Warning:
❏ The fuser unit can be very hot if the printer has been in use. Turn the printer off and wait
for 30 minutes until the temperature has subsided before replacing the fuser unit.
❏ Keep the consumable products out of the reach of children.
Replacing the fuser unit
Follow the steps below to replace the fuser unit.
1. Turn off the printer, and wait with the front cover closed for 30 minutes until the
temperature has subsided.
*OFF
*
To Next Page
Loading...
Need help?
General