Safety Instructions 19
EPSON AcuLaser C3800 User's Guide
Minimize the risk
To minimize the risk of exposure to ozone, you should avoid the following conditions:
❏ Use of multiple laser printers in a confined area
❏ Operation in conditions of extremely low humidity
❏ Poor room ventilation
❏ Long, continuous printing together with any of the above
Printer location
The printer should be located so that the exhaust gases and heat generated are:
❏ Not blown directly into the user’s face
❏ Vented directly out of the building whenever possible
Power On/Off Cautions
Do not turn off the printer:
❏ After turning on the printer, wait until Ready appears on the LCD panel.
❏ While the Ready light is flashing.
❏ While the Data light is on or flashing.
❏ While printing.
To Next Page
Loading...
Need help?
General