c
Important:
When importing values that include individual information such as a scanner name or IP address, make sure the
same IP address does not exist on the same network.
1.
Access Web
Cong
, and then select the Device Management tab > Export and Import Setting Value >
Import.
2.
Select the exported le, and then enter the encrypted password.
3.
Click Next.
4.
Select the settings that you want to import, and then click Next.
5.
Click OK.
e settings are applied to the scanner.
Related Information
& “Running Web Cong on a Web Browser” on page 23
Advanced Security Settings
is section explains advanced security features.
Security Settings and Prevention of Danger
When a scanner is connected to a network, you can access it from a remote location. In addition, many people can
share the scanner, which is helpful in improving operational
eciency
and convenience. However, risks such as
illegal access, illegal use, and tampering with data are increased. If you use the scanner in an environment where
you can access the Internet, the risks are even higher.
For scanners that do not have access protection from the outside, it will be possible to read the contacts that are
stored in the scanner from the Internet.
In order to avoid this risk, Epson scanners have a variety of security technologies.
Set the scanner as necessary according to the environmental conditions that have been built with the customer's
environment information.
Name Feature type What to set What to prevent
Control of protocol Controls the protocols and
services to be used for
communication between
scanners and computers, and
it enables and disables
features.
A protocol or service that is
applied to features allowed or
prohibited separately.
Reducing security risks that
may occur through
unintended use by
preventing users from using
unnecessary functions.
Administrator Information
>
Advanced Security Settings
>
Security Settings and Prevention of Danger
220
To Next Page
Loading...
Need help?
General
