Type Size Thickness Loading Capacity of
the Carrier Sheet
Originals that cannot be
loaded directly into the
scanner
A3
*1
A4
B4
*1
Letter
Legal
*1
B5
A5
B6
A6
A8
Custom size:
❏ Width: up to 431.8 mm (17 in.)
*2
❏ Length: up to 297 mm (11.7 in.)
*3
0.3 mm (0.012 in.) or less
(excluding the thickness of
the Carrier Sheet)
10 sheets
*1 Fold in half to set.
*2 Originals that are wider than 215.9 mm (8.5 in.) need to be folded in half.
*3 The leading edge of the original must be placed at the binding part of the Carrier Sheet when scanning an original
approximately 297 mm (11.7 in.) long. Otherwise, the length of the scanned image may be longer than intended as the
scanner scans to the end of the Carrier Sheet when you select Auto Detect as the Document Size setting in the
application.
Related Information
& “Carrier Sheet Codes” on page 25
Specications
of Envelopes
e
specication
of envelopes you can load into the scanner.
Size Measurement Thickness Loading Capacity
C6 114×162 mm (4.49×6.38 in.)
(standard size)
0.38 mm (0.015 in.) or less 10 envelopes
DL 110×220 mm (4.33×8.66 in.)
(standard size)
Types of Originals that Require Attention
e
following types of originals may not be successfully scanned.
❏ Originals with an uneven surface such as letter head paper.
Specications of Originals and Placing Originals
>
Specications of Originals
>
Types of Original
…
31
To Next Page
Loading...
Need help?
General
