3.
If you want to change the scanner settings, you need to login as an administrator.
Click Administrator Login at the top-right of the screen. Enter the User Name and Current password, and
then click OK.
Note:
If Administrator Logout is displayed at the top-right of the screen, you have already logged-on as an administrator.
Running Web Cong on Windows
When connecting a computer to the scanner using WSD, follow the steps below to run Web Cong.
1.
Open the scanner list on the computer.
❏ Windows 10
Click on the start button, and then select Windows System > Control Panel > View devices and printers
in Hardware and Sound.
❏ Windows 8.1/Windows 8
Select Desktop > Settings > Control Panel > View devices and printers in Hardware and Sound (or
Hardware).
❏ Windows 7
Click the start button, and select Control Panel > View devices and printers in Hardware and Sound.
2.
Right-click on your scanner and select Properties.
3.
Select the Web S er vice tab and click the URL.
Since the scanner uses a self-signed certicate when accessing HTTPS, a warning is displayed on the browser
when you start Web Cong; this does not indicate a problem and can be safely ignored.
Note:
If the administrator password has not been set when accessing Web Cong, you need to set a user name and password.
c
Important:
Do not forget the user name and the password. If you forget them, you will need to contact Epson service
support.
Application for Setting up the Device on a Network (EpsonNet
Cong
)
EpsonNet Cong is an application that allows you to set the network interface addresses and protocols. See the
operations guide for EpsonNet Cong or the application's help for more details.
Starting on Windows
❏ Windows 10
Click the start button, and then select EpsonNet > EpsonNet Cong.
❏ Windows 8.1/Windows 8
Enter the application name in the search charm, and then select the displayed icon.
Scanner Basics
>
Information on Applications
>
Application for Setting up the Device on a Network (EpsonNet Con
…
24
To Next Page
Loading...
Need help?
General
