Epson DS-730 User Manual

Messages Cause
The connection is untrusted. Check the
following. - CA
Certicate
This message appears when the scanner does not have a root certicate
corresponding to the server or a CA
Certicate
has not been imported.
The connection is not secured. This message appears when the obtained certicate is damaged.
SMTP server authentication failed.
Change Authentication Method to
SMTP-AUTH.
This message appears when an authentication method mismatch occurs between
a server and a client. The server supports SMTP AUTH.
SMTP server authentication failed.
Change Authentication Method to
POP before SMTP.
This message appears when an authentication method mismatch occurs between
a server and a client. The server does not support SMTP AUTH.
Sender's Email Address is incorrect.
Change to the email address for your
email service.
This message appears when the specied sender’s Email address is wrong.
Cannot access the product until
processing is complete.
This message appears when the scanner is busy.
Setting a Shared Network Folder
Set a shared network folder to save the scanned image.
When saving a
le
to the folder, the scanner logs on as the user of the computer on which the folder was created.
Creating the Shared Folder
Related Information
& “Before Creating the Shared Folder” on page 65
& “Checking the Network
Prole
” on page 66
& “Location Where the Shared Folder is Created and an Example of the Security” on page 66
& “Adding Group or User Which Permits Access” on page 77
Before Creating the Shared Folder
Before creating the shared folder, check the following.
❏
e
scanner is connected to the network where it can access the computer where the shared folder will be
created.
❏ A multi-byte character is not included in the name of the computer where the shared folder will be created.
Preparing to Scan over a Network > Setting a Shared Network Folder > Creating the Shared Folder
65

Epson DS-730 Specifications

General

Brand	Epson
Model	DS-730
Category	Scanner
Language	English