136 Maintenance
Chapter 8
Maintenance
Cleaning the Scanner
New :For a single scanner
To keep your scanner operating at its best, clean it periodically
using the following procedure.
1. Turn off the scanner using its power button.
2. Unplug the AC adapter cord from the scanner.
3. Clean the outer case with a cloth dampened with mild
detergent and water.
4. If the glass surface of the document table gets dirty, clean it
with a soft dry cloth. If the glass surface is stained with grease
or some other hard-to-remove material, use a small amount
of glass cleaner and a soft cloth to remove it. Wipe off all
remaining liquid.
Make sure that no dust builds up on the surface of the
document table. Dust can cause spots in your scanned images.
To Next Page
Loading...
Need help?
General