Scanning Using the Automatic Document Feeder 61
4
4
4
4
4
4
4
4
4
4
4
4
Selecting the Scan Size
You can scan your images at their original size, or you can reduce
or enlarge their size as you scan them. You do this using the Target
Size setting in Professional Mode.
Professional Mode
If you are going to scan your image to a particular size, you should
select the Target Size setting after previewing it, but before
adjusting your scan area (indicated by the marquee). This sets the
scan area to the correct proportions so your image will not be
cropped unexpectedly.
To Next Page
Loading...
Need help?
General