Control panel
A
P button (power button)
Turns the power on and off.
B
P light (power light)
The printer's operational status is indicated by a lit or
flashing light.
On : The power is on.
Flashing : The printer is receiving data or
performing head cleaning or other
operations during shut-down.
Off : The power is off.
C M button (Media Setup button)
Pressing this button displays the Media Setup menu
on the screen to perform Feed To Cut Position,
Media Remaining, Select Media, Customize
Settings, and Easy Media Setup.
U “The Media Setup Menu” on page 103
If you press this while printing, you can adjust the
media feed.
U “Correcting Banding” on page 55
D Display
Displays the printer's status, menus, error messages,
and so on. U “Understanding the Display” on
page 16
E Menu button
Press this button to display menus. U “Using the
Control Panel Menu” on page 96
F y button (back button)
Press this button to exit to the previous menu when
options are displayed. U “Menu Operations” on
page 96
G
l/r buttons (left and right arrow buttons)
Use to position the cursor when performing such
tasks as entering a Setting Name or IP address in the
setup menu.
H
u/d buttons (up and down buttons)
SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide
Introduction
15
To Next Page
Loading...
Need help?
General