When a film of ink adheres to the
guide section
If a film-like layer of adhered ink cannot be removed
completely using a cleaning stick, remove it using
tweezers.
If no other parts need to be cleaned, proceed to the
following section.
U “Finishing Cleaning” on page 71
When there is lint or dust in the cap
Remove using the tip of the cleaning stick or tweezers.
If no other parts need to be cleaned, proceed to the
following section.
U “Finishing Cleaning” on page 71
When there is lint attached to the
flushing pad
Wipe off lint and dust with the tip of a cleaning stick.
c
Important:
Do not deform the metal section of the top surface. If
they are deformed, they may damage the print head.
SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide
Maintenance
70
To Next Page
Loading...
Need help?
General