155
Chapter 3 Handling
3
Warning Processing
PRINTER ERROR ##
(##: 01 to 0A, 16 to 18,
26, 27,2A, 31 to 37
41 to 47, 56 to 58, 62,
63, C1 to C4, C6 to C8,
D6 to DB)
Paper jam
Poor autocutter operation
Irregular ambient temperature
Malfunction
The printer will not recover until you perform
the proper processing, then turn the power
on again.
1. Turn the power off.
2. Open the paper set cover.
3.Open the front cover.
If you cannot open the front cover, the
cutter blade may be locked. Turn this
product's power off and on again.
4. Remove all the paper that is in the paper
path.
5. Close the front cover.
6. Turn the power back on.
(If the error occurs again, request a
repair.)
7. Run auto loading of the paper.
SERVICE REQD. ##
(##: F0 to F4)
Service required
The product is beyond its
service life.
Malfunction
Request a repair.
LCD display
Warning type
Description Recovery method
INK LOW
Ink cartridge low
Ink is running low. Because it is almost time to replace the ink
cartridge, prepare an ink cartridge for
replacement. When the status changes to
“Replace ink cartridge”, replace the ink
cartridge.
M/B NEAR FULL
Maintenance box near full
The maintenance box is
almost full.
Because it is almost time to replace the
maintenance box, prepare a maintenance
box for replacement. When the status
changes to “Replace maintenance box”,
replace the maintenance box.
NOZZLE CLOGGED
Print head nozzle clogged
Nozzle is clogged. Check the printing result and perform head
cleaning. Execute manual head cleaning
from [Cleaning] on the unit panel.
Check the printing result, and if the nozzle
clog cannot be permitted, perform repairs.
LCD display
Error
Description Recovery method
To Next Page
Loading...
Need help?
General
