188
Print Area and Cutting Position
Full-page label(Black mark) / Roll paper
When "Extend Printable Area" is disabled
Ver tical margins: 1.5 mm {0.06"} (Typical value)
Lateral margins: 1.5 mm {0.06"} (Typical value)
The distance from the paper cut position to the black mark leading edge must be at least 1.5
mm {0.06"}. If it is less than 1.5 mm {0.06"}, the printer may be unable to print pages because
it fails to sense their black marks or skips them, etc.
Black mark position
Paper
Label area
Print area
Auto-cut position
Auto-cut position
Print area width
Paper width
Paper feeding
direction
1.5 mm { }
0.06”
1.5 mm { }
0.06”
1.5 mm { }
0.06”
1.5 mm { }
0.06”
25.4 mm { } or more
1.0”
28 mm { } or more
1.12”
Outer edge
(Removed)
2.0 mm { }
0.08”
Outer edge
(Removed)
2.0 mm { }
0.08”
To Next Page
Loading...
Need help?
General
