Epson TM-C7500G series User Manual

32
Beeper
When an error occurs, the beep sounds. The beeper continues to beep until all the causes of error are
removed. When “Completion Beeper Setting” is enabled, the printer performs “Beeper sound when
the printer is not in an error state” shown in the below table.
•Frequency: Fixed to approximately 2.5 kHz
•Volume control: 5 levels on the software
Sounding
period
Silent
period
Number
of the
pattern
repeated
Overall
time
Number of
times
repeated
Printer event
500 ms 200 ms 5 6 seconds
Until the error
factor is
removed.
Sound the beeper on an error
 Service required
 Printer error
 Replace ink cartridge
 Replace maintenance box
 Media form error
 Media size error
 Paper jam error
 Paper removal error
 Paper out error
100 ms 100 ms 5 1 second 1
 Ink cartridge cover open
 Maintenance box cover open
 Paper set cover open
 Roll paper cover open
 Front cover open
 Auto loading failure
 Storage capacity over
 No ink cartridge
 No maintenance box
 Ink cartridge read error
 Maintenance box read error
1 second - None - 1 Printing finished
100 ms - None - 1
 Operation panel sound vol-
ume change
 Auto loading successes

Epson TM-C7500G series Specifications

General

Brand	Epson
Model	TM-C7500G series
Category	Label Maker
Language	English