92
Layout settings
Item Description
Media layout name Sets the media layout name.
Enter a name.
Defined media layout The defined media layout in the list is displayed.
Media form Sets the media form.
Layout Information (mm) Sets the media width, label width, left gap, label length and blackmark
interval.
Layout information that can be set changes depending on the media
form. Before setting the layout information, set the media form.
Borderless printing When checked, the printing range can be expanded.
When the margins are zero, the print may extend outside of the media/
label. Use it accordingly.
Feather edges When [Feather edges] is checked, gradation processing is performed
on the margin areas. It can be set only when [Borderless printing] is
checked.
When printing on long labels, depending on the media, the print result may not reach the specified
length. As a result, provided the paper feed direction is up, the bottom edge of the label may be
blank. If this blank bothers you, try the method below.
Step 1: Check the print result.
Step 2: Add the blank section to the specified label length in the layout setting menu.
To Next Page
Loading...
Need help?
General
