4.5 Climate Control System
WARNING: Do not use propylene
glycol based coolant
•
Never secure hoses or tubes to the
transmission fill or dip stick or to any fuel
system or brake component
•
Do not route heater or refrigerant lines near or
directly over any exhaust system component,
including the exhaust manifolds.
•
Avoid routing of hoses in the wheelhouse or
stone kick-up arch. However, if routing is
required in these areas, shield against stone
pecking as appropriate.
•
Do not route hoses near sharp edges. Utilize
guards to protect against cutting or chafing.
FordTransit 2006.5 (April 2006–)
Date of Publication: 12/2006
4 Electrical
106
To Next Page
Loading...
Need help?
General
