4.8 Tachograph
The factory-fit Tachograph option uses a
Siemens VDO system. It is recommended,
therefore, that any vehicle that requires a
tachograph is sent to an authorised Siemens
VDO Tachograph Service Centre for system
installation and calibration.
Details of all recommended Service Centers can
be found on Siemens web site. This site also
contains details of current regulations and
tachograph operation.
4.8.1 Legislation
WARNING: All tachographs require
the same wiring connections as this
is controlled by tachograph
legislation.
There are two types of tachograph available, See
below diagrams, E75501 mechanical (MTCO)
and E75502 digital (DTCO). The type of
tachograph required by the customer will depend
on the legislation in the country of use.
Mechanical (MTCO) Tachograph
FordTransit 2006.5 (April 2006–)
Date of Publication: 12/2006
4 Electrical
109
To Next Page
Loading...
Need help?
General
