2.8 Hydraulic Brake Actuation
2.8.1 Load Apportioning Valves
•
It is not necessary or recommended to modify
the load apportioning valves, however, if a
special conversion should require modifications
– Maintain original settings
– Maintain brake certification load distribution
NOTE: For further information please contact
your local National Sales Company representative,
or Local Ford Dealer. If they are unable to help
you then please contact the Vehicle Converter
Advisory Service at VCAS@ford.com.
2.8.2 Front and Rear Brakes
WARNINGS:
Do not modify the brakes
Do not modify the disc in flow and
out flow of cooling air
FordTransit 2006.5 (April 2006–)
Date of Publication: 12/2006
2 Chassis
64
To Next Page
Loading...
Need help?
General
