Fronius Primo GEN24 3.0 Plus User Manual

Suitable battery
BYD Battery-Box
Premium
Fronius explicitly points out that the third-party batteries are not Fronius products.
Fronius is not the manufacturer, distributor or retailer of these batteries. Fronius accepts
no liability and offers no service or guarantees for these batteries.
Obsolete firmware/software states may lead to incompatibilities between the inverter and
the battery. In this case, the following steps are to be performed:
- Update battery software - see the battery documentation.
- Update inverter firmware - see Update on page 99.
Before installation and commissioning, read this document and the Installation Instruc-
tions for the external battery.
All the documents relating to the inverter can be found at the following address:
https://www.fronius.com/en/solar-energy/installers-partners/service-support/tech-
support
The documentation for the BYD Battery-Box Premium is enclosed with the third-party
battery or can be obtained from the battery manufacturer and its service partners.
BYD Battery-Box Premium HVS 5.1 7.7 10.2 12.8
Fronius Primo GEN24 3.0 - 6.0*
Fronius Primo GEN24 3.0 - 6.0 Plus
Number of modules 2 3 4 5
* battery support optionally available.
BYD Battery-Box Premium HVM 8.3 11.0 13.8 16.6 19.3 22.1
Fronius Primo GEN24 3.0 - 6.0*
Fronius Primo GEN24 3.0 - 6.0 Plus
Number of modules 3 4 5 6 7 8
* battery support optionally available.
23
EN

Fronius Primo GEN24 3.0 Plus Specifications

General

Max. input current	12 A
Max. input voltage	1000 V
Protection class	IP66
Max. output current	13 A
THD	< 3%
Max. input current (DC)	12 A
Number of MPP trackers	2
Max. DC short-circuit current	18 A
AC Output Frequency	50/60 Hz
AC nominal output	3000 W
Max. apparent AC power	3000 VA
AC nominal voltage	230 V
Operating Temperature Range	-25 to +60 °C
Cooling	Active cooling
Maximum Input Power	4, 500 W
Warranty	5 years