3 Copy
104
Copy
3
Specify the amounts of the top and bottom, and left and right margins in the range from
0 to 50 mm in 1 mm increments.
îš„Margin Shift
Allows you to specify the amounts of the top and bottom, and left and right margins in
the range from 0 to 50 mm in 1 mm increments.
Invert Image (Making Reversed Copies of Images)
This feature allows you to reverse the left and right sides of the document image or to
create a negative image of the document when making copies.
Note • When [Output Color] is set to [Black & White] or [Single Color], the black color on the
document is inverted to white, and the white color to black.
• When [Output Color] is set to [Color], the colors are inverted to their complementary colors.
• When [Negative Image] and [Edge Erase] are set simultaneously, the edge erase area turns
to white.
1 Select [Invert Image].
2 Select any option.
îš„Mirror Image
Reverses the left and right sides of the document image.
îš„Negative Image
Creates a negative image of the document.
Original Orientation (Specifying the Orientation of Loaded Documents)
This feature allows you to specify the orientation of a document so that the machine
can identify the top of the document.
Note • If the [Original Orientation] setting differs from the actual document orientation, the machine
may not detect the top of the document correctly.
To Next Page
Loading...
Need help?
General
