Layout Adjustment
277
Scan
5
the specified size while keeping its orientation. For example, when an A4 landscape original
is loaded and the output size is set to A5 portrait, the scanned image is reduced to A6
landscape and printed on A5 portrait paper.
• If the document size cannot be detected automatically, a screen to enter the document size
appears.
1 Select [Mixed Size Originals].
2 Select any option.
îš„Off
Select this option when all documents are of the same size.
îš„On
When scanning documents of different sizes, the machine automatically detects the
size of each document.
îš„Original Orientation
Specify the orientation of the loaded document.
When you load the top edge of the document against the left side of the document glass
or the document feeder, and then select [Sideways Images], the document is displayed
in the correct orientation when viewed on your computer screen.
Note • If the [Original Orientation] setting differs from the actual document orientation, the machine
may not detect the top of the document correctly.
z
Upright Images
Select this option when placing the top edge of the document against the top side of
the document glass or document feeder.
z
Sideways Images
Select this option when placing the top edge of the document against the left side of
the document glass or document feeder.
Edge Erase (Erasing Edges and Margin Shadows in the Document)
When you scan a document with the document cover open or when you scan a book,
the edges and center margin of the document may be scanned as black shadows. The
Edge Erase feature allows you to erase such shadows.
Note • For 2-sided originals, the same edge erase amounts are set for the front and back sides.
• If you set [Reduce/Enlarge], the edge erase amounts will be reduced or enlarged in
proportion to the ratio you specified.
To Next Page
Loading...
Need help?
General
