Fax
4
4 Fax
198
îš„Password
Select the [Password] box, and enter the password using the numeric keypad. If a
password is not set, leave this box blank.
Note • You can enter up to 20 digits for the password.
îš„Keyboard
Enter the F code or the password using the displayed keyboard.
• For information on how to enter characters, refer to "Entering Text" (P.58).
10 Specify a destination, and then press the <Start> button.
Internet Fax Profile (Specifying Internet Fax Profiles)
A profile is specified to restrict attribute information such as image resolution and paper
size for transmissions between Internet Fax-compatible machines.
Note • The profiles that can be processed differ depending on the Internet Fax-compatible machine
of the recipient. Before specifying a profile, confirm the profiles the Internet Fax-compatible
machine of the recipient can process.
• If inconsistency occurs between a profile, and stored document size and resolution, priority
is given to the settings specified in the profile.
• If the profile differs for each recipient when using Broadcast Send, the smallest size
becomes the maximum image size.
• This feature is not available for some models. An optional component is required. For more
information, contact our Customer Support Center.
You can set an Internet Fax profile for each address number. For information on how to register address
numbers, refer to "5 Tools" > "Setup" > "Add Address Book Entry" in the Administrator Guide.
You can change the default value of [Internet Fax Profile] in the System Administration mode. For
information on how to change the default value, refer to "5 Tools" > "Fax Service Settings" > "Fax
Defaults" > "Internet Fax Profile" in the Administrator Guide.
1 Select [Internet Fax Profile].
2 Select any option.
To Next Page
Loading...
Need help?
General
