EasyManuals Logo
Home>Fuji Xerox>Printer>ApeosPort-IV C4430

Fuji Xerox ApeosPort-IV C4430 User Manual

Fuji Xerox ApeosPort-IV C4430
393 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #180 background imageLoading...
Page #180 background image
Fax
4
4 Fax
180
1 Select [Reduce/Enlarge.]
2 Select a preset ratio, or specify a value.
Note • If a magnification is specified in [Reduce/
Enlarge], [Rotate 90 degrees] does not
function.
Variable %
Specify a ratio in the range from 50 to 400% in 1% increments. To specify a value, use
the numeric keypad or [+] and [-].
Preset %
z
100%
Scans at the same size as the original.
z
Auto %
If the scan width of the document exceeds the maximum image size, the scanned
image is rotated or reduced to fit the maximum size.
When the speed dialing is used, the maximum image size will be the size registered
in the Address Number. When speed dialing is not used, the maximum size will be
A4.
Note • You can specify whether to rotate documents in the System Administration mode. For more
information, refer to "5 Tools" > "Fax Service Settings" > "Fax Control" > "Rotate 90
degrees" in the Administrator Guide.
z
Preset ratios
Select from preset scan ratios.
You can change the default values of scan ratios other than [100%] and [Auto %]. For more information,
refer to "5 Tools" > "Fax Service Settings" > "Reduce/Enlarge Presets" in the Administrator Guide.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-IV C4430 and is the answer not in the manual?

Fuji Xerox ApeosPort-IV C4430 Specifications

General IconGeneral
BrandFuji Xerox
ModelApeosPort-IV C4430
CategoryPrinter
LanguageEnglish

Related product manuals