Fuji Xerox ApeosPort-V C3320 User Manual

4 Fax
184
Fax
4
Specifying a Destination Using the Redial Feature
You can specify recipients using the Redial feature.
Important • When transmission to a certain recipient is prohibited in the System Administration mode, [Redial
List] cannot be used.
1 Select [Redial List].
2 Select items you want to specify for a recipient,
and select [Close].
Entering Specific Symbols
When specifying a recipient, you can use the following features to enter specific symbols on
the touch screen.
When using the DTMF method, use specific symbols. For information on the DTMF method, refer to "Remote Folder (Using
Remote Folder)" (P.202) and "Broadcast" (P.217).
Feature Button Function Input method
Enter pause - or
<Pause> (-)
Used to enter a pause.
One pause is 3 seconds.
You can enter pauses of 6
seconds, 9 seconds, etc.
with additional button
presses.
Press the <Pause> button.
(Example)
0-123 ...
0--123 ...
Transmit using a
password
S When a password has
been set, transmission will
start only if the password
matches the ID number
on the remote terminal.
1. Select the keyboard
button on the [Fax/
Internet Fax] screen to
display the keyboard.
2. Select [S].
(Example)
0312345678S12345678
Transmit DTMF
signal
! Used to transmit the
DTMF signal.
1. Select the keyboard
button on the [Fax/
Internet Fax] screen to
display the keyboard.
2. Select [More
Characters].
3. Select [!].
(Example)
0311123456!123#

Fuji Xerox ApeosPort-V C3320 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-V C3320
Category	All in One Printer
Language	English