6 Send from Folder
322
Send from Folder
6
Important • If power is cut off immediately after a scanned file is stored in a folder, or if the hard disk space is
insufficient to display thumbnails, files in the folder may not be displayed in thumbnail view. In that
case, display them in list view.
• Characters and images in thumbnail view may not be correctly displayed because they are scaled
down from the actual sizes.
Note •The orientation of an image displayed in thumbnail view depends on which orientation the
document was stored in.
Number of Files
Displays the number of files stored in the selected folder.
Select All
Selects all the files in the folder. To deselect all the files, select this button again while all the
files are being selected.
Delete
Deletes the selected files in the folder.
File Details (Preview)
Previews the selected file to allow you to check its details.
Refer to "Checking File Details" (P.323).
Job Flow Settings
Displays the [Job Flow Settings] screen on which you can create, link, and execute job flows.
Refer to "Configuring/Starting Job Flow" (P.328).
Note •Files stored in a folder by specifying [Store in Remote Folder] on a print driver are called "print files".
Job flows are not available for print files. If print files are included in the selected files, a job flow can
be executed for the files other than the print files.
Print
Allows you to print the selected files separately.
Refer to "Print" (P.326).
Batch Print
Allows you to print the selected multiple files as one file.
Refer to "Batch Print" (P.326).
To Next Page
Loading...
Need help?
General
