1 Before Using the Device
14
Device Installation
Do not locate this product where people might step on or trip over the power cord.
Friction or excessive pressure may generate heat and eventually cause electric
shock or a fire accident.
Never locate this product in the following places:
z
Near radiators or any other heat sources
z
Near volatile flammable materials such as curtains
z
In the hot, humid, dusty or poorly ventilated environment
z
In the place receiving direct sunlight
z
Near cookers or humidifiers
Keep away the packing materials of device from small children. The thin film may
cling to nose and mouth and prevent breathing.
Locate this product on a level and sturdy surface that can withstand its weight.
Otherwise, if tilted, the product may fall over and cause injuries.
Locate this product in a well-ventilated area. Do not obstruct ventilation openings
of the product. Poor ventilation may cause overheat and a fire accident.
Keep the minimum clearance as follows for ventilation and an access to the power
plug. Unplug the product if an abnormal condition is noted.
z
With HCF C1-DS (optional), Interface Decurler Module D1 (optional), Inserter
D1 (optional), Crease/Two-sided Trimmer D2 (optional), Folder Unit CD2
(optional), Finisher D6 with Booklet Maker (optional) and SquareFold Trimmer
D1 (optional)
Do not incline the product at more than 10 degree angle. Otherwise, it may fall
over and cause injuries.
100
804
521
400
80
20
1825
4784
4684
To Next Page
Loading...
Need help?
General
