3 Paper and Other Media
72
Loading Paper in Tray 6 (HCF (A4 1 Tray))
The following describes the procedure for loading paper into Tray 6 (HCF (A4 1 Tray))
(optional).
When the device runs out of paper during copying or printing, a message is displayed on
the touch screen. Add paper according to the displayed instructions. Copying or printing is
automatically resumed when paper is added.
z
Fan the paper well before loading paper in a tray. It prevents paper from sticking to each other and reduces
paper jams.
1 Pull out Tray 6 until it stops.
z
While the device is processing a job, do not pull out the tray that the job uses.
z
Do not add a new stack of paper on top of the remaining paper in the tray to prevent paper jams or any other
troubles. First, remove the remaining paper from the tray, and then load the new stack of paper.
2 Remove any paper loaded in the tray.
3 When you want to change the paper size, adjust the positions of the guides.
1) Open the end guide (1) and unscrew the screw (2). And then remove the guide from the
tray.
To Next Page
Loading...
Need help?
General
