3 Paper and Other Media
70
z
Adhesive-flap envelope
4 Instruct a copy or print job.
z
When you load the paper in Tray 5 for copying, the [Tray 5] screen appears.
Loading Tab Paper in Tray 5
The following describes the procedure for loading tab paper in Tray 5 (Bypass).
z
Tab paper can be used only for Covers and Separators.
z
When adding paper to Tray 5 (Bypass), remove any paper remaining in the tray, and then load the removed
paper with the new stack of paper.
z
Before loading paper in a tray, fan the paper well. It prevents paper from sticking to each other and reduces
paper jams.
z
When a paper jam occurs, the device outputs unnecessary paper after you have cleared the paper jam, and
resumes copying or printing. For example, you load 5-tab paper and set [Add Tab Stock] to five. If a paper
jam occurs when copying the fourth page, the device will automatically output the fifth page and the first
page to the third page of the next paper set after you have cleared the paper jam, and then the device
resumes copying.
z
When copying or printing on tab paper is interrupted, a confirmation screen will appear on the touch screen
after the interrupt mode is exited. Load the tab paper according to the message.
To Next Page
Loading...
Need help?
General
