7 Problem Solving
178
When the Interface Decurler Module D1 is installed
1) Close the Interface Decurler Module front door.
z
If the front door is not completely closed, a message will appear and the device remains paused.
Paper Jams in the Output Tray
1 Remove jammed paper from the output tray.
z
If the paper is torn, make sure no piece of paper remains inside the device.
Paper Jams in the Transport Unit V1
The following describes how to clear paper jams inside the Transport Unit V1 when the C3
Finisher (optional) or the C3 Finisher with Booklet Maker (optional) is installed.
z
Remedy differs depending on where the paper jam occurs. Follow the instructions displayed and remove the
jammed paper.
Paper Jams at the Handle [1c]
1 Make sure that the device has stopped, and open the Transport Unit V1 front door.
To Next Page
Loading...
Need help?
General
