Fuji Xerox ApeosPort-VII C7788 User Manual

Emptying the Trimmer Waste Container
147
3 Push the waste container back in to its original position.
Important
z
Make sure to completely empty the waste container. If the waste container is reinstalled with some scraps
remaining, it may become full before the message appears again, and this may lead to breakdown of the
device.
4 Close the door.
When the SquareFold Trimmer D1 is installed
1 Make sure that the device has stopped, and pull out the waste container.
2 Pull out the waste container with both hands by holding its belt, and discard all the scraps.
Important
z
Do not swing the waste container with holding its belt.
z
Do not use your hand to remove the scraps. The notches of the waste container may cause injuries.
3 Push the waste container back in to its original position.

Fuji Xerox ApeosPort-VII C7788 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-VII C7788
Category	All in One Printer
Language	English