5 Tools
204
Tools
5
Selecting [High] verifies the validity of certificates, and determines only certificates that
have not been revoked as valid.
îš„ Retrieval of Certificate Status
Select the method to verify the validity of certificates. Select [By Retrieving CRL] if the
machine retrieves a CRL (Certificate Revocation List) from the validation authority to verify
the revocation status of the certificate. Select [By OSCP] if the machine uses OSCP (Online
Certificate Status Protocol), which can verify the validity revocation status of the certificate,
to have the certificate authority or validation authority check the revocation status.
îš„ Auto Retrieval of CRL
Select whether or not to automatically retrieve a CRL.
îš„ CRL Retrieval Time-Out
Specify a time-out value to retrieve a CRL from 5 to 60 seconds in 1 second increments.
îš„ Send Query to OCSP Responder With
Select how to access an OCSP responder from [URL as Specified in Certificate] or [URL as
Specified by Administrator].
îš„ URL of OCSP Responder
Enter the URL of an OCSP responder when [URL as Specified by Administrator] has been
selected for [Send Query to OCSP Responder With]. Up to 255 characters are allowed.
îš„ OCSP Communication Time-Out
Specify a time-out value for OCSP communication from 5 to 60 seconds in 1 second
increments.
Other Settings
You can set the following network related items:
Protocol to Receive E-mail
Select from [SMTP] and [POP3] depending on your environment.
Add Domain Name to User Name
Select whether or not to add domain names to user names.
Output Destination for E-mail
Specify an output destination for e-mail print. Selecting [Auto] enables the machine to
select the output destination, which is set as the default output destination.
Domain Filtering
Set the domain filtering settings for the E-mail, Internet Fax, and IP fax (SIP) features.
îš„ Domain Filtering
When [Allow Domains] is selected, you can specify domains to permit transmissions. When
[Block Domains] is selected, you can specify domains to prohibit transmissions.
îš„ Domains 1 to 50
When [Domain Filtering] is set to [Allow Domains] or [Block Domains], you can specify up to
50 domains to allow or block transmissions.
To Next Page
Loading...
Need help?
General
