Google Cloud Print
683
Appendix
16
5 Enter the Google account and passcode of the user using this feature, and log in.
6 Click [Finish printer registration].
7 Registering to Google Cloud Print is finished.
Click [Manage your printers].
8 Confirm that your machine is in the list.
When the registration is done, you can print from your machine by logging in to the owner's
account.
Note • If the registration failed, go back to step 2 and click [Register This Device to Google Cloud Print]
again to re-print the registration paper.
• Sharing settings are needed to use the machine with non-owner accounts. For more information on
sharing settings, refer to "Sharing a Device between Multiple Users" (P.683).
Checking the Device Registration Status
You can check if your machine is registered to Google Cloud Print, with CentreWare Internet
Services.
1 Start a web browser from a network connected computer.
2 Enter the machine's IP address into the address box on the browser, and then press the
<Enter> key. Connection to CentreWare Internet Services is established.
Note • During connection/operation, pop-up screen for user ID/passcode entry may appear. In this case,
enter a system administrator's user ID/passcode and click [OK].
3 Click [Properties] tab > [Connectivity] > [Protocols] > [Google Cloud Print].
Depending on the registration status, [Registered] or [Not Registered] is displayed.
Note • It may take time for Google program to complete the registration, depending on the environment or
busyness of the network.
• If [Google Cloud Print] does not show in [Protocols], Google Cloud Print port may not be enabled. For
information on Google Cloud Print port, refer to "Enabling [Google Cloud Print] Port" (P.681).
Sharing a Device between Multiple Users
You can share the machine between multiple users by registering Google accounts of non-
owner users. Then the users can use Google Cloud Print to print out from the machine.
To Next Page
Loading...
Need help?
General
