Loading Paper
51
Paper and Other Media
2
2 Hold the center of the paper guides and slide
them to the desired paper size.
3 Load paper with the side to be copied or
printed on facing up, inserting the paper until
its edge lightly touches against the paper feed
entrance.
Important • Do not load mixed paper types in tray.
• Do not load paper above the maximum fill
line. It might cause paper jams or machine
malfunctions.
4 Adjust the paper guides to align the edges of
the paper loaded.
5 Instruct a copy or print job.
Loading Tab Paper in Tray 5 (Bypass)
The following describes the procedure for loading tab paper into Tray 5 (Bypass).
Important • Tab paper can be used only for [Tab Margin Shift], Covers, and Separators.
Note • Fan the paper well before loading paper in a tray. It prevents paper from sticking to each other and
reduces paper jams.
1 Open the Tray 5 (Bypass).
Note • If necessary, pull out the extension tray. The
extension tray can be extended in two stages.
Pull out the extension tray gently.
To Next Page
Loading...
Need help?
General
