Loading Paper
53
Paper and Other Media
2
2 Load and align the edge of the paper against
the right edge of the tray with the side to be
copied or printed on facing up.
Important • Do not load paper above the maximum fill
line. It might cause paper jams or machine
malfunctions.
3 Push the tray in gently until it stops.
Important • When pushing the paper tray in, do it slowly. If the tray is pushed with too much force, it might cause
machine malfunctions.
Loading Paper in Trays 6 and 7 (HCF (A4 2 Tray)) (Optional)
The following describes the procedure for loading paper into Trays 6 and 7 (HCF (A4 2 Tray))
(optional).
When the machine runs out of paper during copying or printing, a message is displayed on
the touch screen. Add paper according to the displayed instructions. Copying or printing is
automatically resumed when paper is added.
Note • Fan the paper well before loading paper in a tray. It prevents paper from sticking to each other and
reduces paper jams.
For information about changing the paper size and orientation, refer to "Changing the Paper Size for Trays 6 and 7 (HCF (A4
2 Tray)) (Optional)" (P.58).
1 Pull out the Trays 6 or 7 until it stops.
Important • While the machine is processing a job, do not
pull out the tray that the job uses.
• Do not add a new stack of paper on top of
the remaining paper in the tray to prevent
paper jams or any other troubles. First,
remove the remaining paper from the tray,
and then load the new stack of paper.
2 Load and align the edge of the paper against
the right edge of the tray with the side to be
copied or printed on facing up.
Important • Do not load paper above the maximum fill
line. It might cause paper jams or machine
malfunctions.
3 Push the tray in gently until it stops.
Important • When pushing the paper tray in, do it slowly. If the tray is pushed with too much force, it might cause
machine malfunctions.
Loading Paper in Tray T1 (Inserter) (Optional)
The following describes the procedure for loading paper in Tray T1 (Inserter) (optional).
To Next Page
Loading...
Need help?
General
