Registering/Deleting/Renaming Stored Programs
409
Stored Programming
8
Deleting Stored Programs
The following describes how to delete stored programs.
1 Select [Delete].
2 Select the number to be deleted.
3 Select [Delete].
Note • Deleted stored programs cannot be restored.
Entering/Changing a Stored Program Name
The following describes how to enter or change the name of a stored program.
Up to 18 characters are allowed for a stored program's name.
For information on how to enter characters, refer to "Entering Text" (P.96).
1 Select [Enter/Change Name].
2 Select the number to register or change a name.
3 Enter a name, and select [Save].
Assigning/Changing Icons for Stored Programs
The following describes how to assign or change an icon of a stored program.
You can select from 12 icons.
1 Select [Assign/Change Icon].
2 Select the stored program number to assign or change an icon.
3 Select an icon, and select [Save].
To Next Page
Loading...
Need help?
General
