184 Troubleshooting
Print Quality Problems
This section includes:
•"
The Output Is Too Light" on page 185
•"Toner Smears or Print Comes Off/Stain on Back Side" on page 186
•"Random Spots/Blurred Images" on page 187
•"The Entire Output Is Blank" on page 187
•"Streaks Appear on the Output" on page 188
•"Pitched Color Dots" on page 188
•"Vertical Blanks" on page 188
•"Mottle" on page 189
•"Ghosting" on page 190
•"Fog" on page 191
•"Bead-Carry-Out (BCO)" on page 191
•"Auger Mark" on page 192
•"Wrinkled/Stained Paper" on page 193
•"The Top Margin Is Incorrect" on page 194
•"Color Registration Is Out of Alignment" on page 195
•"Protrudent/Bumpy Paper" on page 196
NOTE:
• In this section, some procedures use the Printer Setting Utility or the SimpleMonitor. Some procedures that
use the Printer Setting Utility can also be performed using the operator panel.
See also:
•"Understanding the Printer Menus" on page 152
•"Printer Setting Utility (Windows Only)" on page 44
•"SimpleMonitor (Windows Only)" on page 45
To Next Page
Loading...
Need help?
General
