Fuji Xerox DocuPrint CP215 Series User Manual

218 Maintenance
 Cleaning the Color Toner Density (CTD) Sensor
Clean the CTD sensor only when an alert for the CTD sensor is shown on the Status Monitor window
or operator panel.
1 Turn off the printer and disconnect the power cord.
2 Push the rear door handle and open the rear door.
3 Clean the CTD sensor inside the printer with a clean dry cotton swab.
4 Close the rear door.
5 Connect the power cord and turn on the printer.

Fuji Xerox DocuPrint CP215 Series Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CP215 Series
Category	Printer
Language	English