126 Printing Basics
Loading Print Media in the Paper Tray
NOTE:
• When you are printing on any print media that is smaller than the A5 size paper, be sure to load it in the paper
tray.
• To avoid paper jams, do not remove the paper tray while printing is in progress.
• Use only laser print media. Do not use ink jet paper on your printer.
• For manually loading print media for duplex (2-sided) printing, see "Manual Duplex Printing (PCL Print Driver
Only)" on page 144.
• Do not wipe the pink-tinted grease off as doing so may cause paper to misfeed.
1 Pull the paper tray out of the printer about 200 mm. Hold the tray with both hands, remove it from
the printer, and then remove the paper tray cover from the paper tray.
To Next Page
Loading...
Need help?
General
