Using the Operator Panel Menus 173
• Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure. You
can specify the altitude of the printer location for adjustment.
NOTE:
• An incorrect altitude adjustment leads to poor printing quality and an incorrect indication of remaining toner.
Values:
• Machine Life
Purpose:
To specify whether to continue print operations when the printer comes to the end of its service life.
Values:
NOTE:
• When the printer no longer operates showing the error code 191-310 on the LCD panel, press the (Back)
button and the button at the same time and change the Machine Life setting to Keep Printing. Then,
you can keep using the printer.
• Although you can keep using the printer after the end of its service life by changing the setting to Keep
Printing, the printing quality is not guaranteed.
0m* Select the altitude of the location where the printer is installed.
1000m
2000m
3000m
* Factory default menu setting
Stop Printing* Stops print operations at the end of service life.
Keep Printing Continues print operations after the end of service life.
* Factory default menu setting
To Next Page
Loading...
Need help?
General
