172 Using the Operator Panel Menus
• Toner Refresh
Purpose:
To use up a toner cartridge when you need to replace it before the end of its life, or to stir the toner in
a new toner cartridge.
Values:
• Initialize NVM
Purpose:
To initialize the NVM for the printer settings. Enabling this feature and rebooting the printer will reset
all the printer settings to their factory default values.
See also:
• "Resetting to Factory Defaults" on page 188
Values:
• Non-Genuine Mode
Purpose:
To use a toner cartridge of another manufacturer.
NOTE:
• Using a non-genuine toner cartridge may make some printer features unusable, reduce print quality and
decrease the reliability of your printer. We recommend you use only new Fuji Xerox brand toner cartridges for
your printer. We do not provide warranty coverage for problems caused by using non-genuine consumables.
• Before you use a toner cartridge of another manufacturer, be sure to restart the printer.
Values:
Black Yes Cleans the toner in the toner cartridge.
No* Does not clean the toner in the toner cartridge.
* Factory default menu setting
System Section Yes Initializes the printer settings.
No* Does not initialize the printer settings.
* Factory default menu setting
Toner Off* Does not use a toner cartridge of another manufacturer.
On Uses a toner cartridge of another manufacturer.
* Factory default menu setting
To Next Page
Loading...
Need help?
General
